Skip to content
Products & quality

Material, specified and traceable.

Concrete, aggregates, sand, GGBS and specialty materials — produced and traded through the group, with a documented quality protocol before anything leaves the plant.

Categories
5
Inspection stages
3
Lab
In-house
Datasheets
On request
Ready-Mix ConcreteAggregatesSandGGBSSpecialty Materials
01

Ready-Mix Concrete

Plant-batched concrete designed to project specification, dispatched with pour records. Mix designs are confirmed through trial batches before supply.

  • Standard RMC

    Common structural grades, project-specific mix design

    Slabs, columns, footings

    Enquire

  • Self-compacting concrete

    High-flow, no-vibration placement

    Dense reinforcement, fair-faced concrete

    Enquire

  • Temperature-controlled concrete

    Placement temperature held to agreed band

    Mass and raft pours

    Enquire

  • Fibre-reinforced concrete

    Steel or synthetic fibre dosage to design

    Industrial floors, pavements

    Enquire

  • Water-resistant concrete

    Low-permeability mix, controlled w/c ratio

    Basements, tanks

    Enquire

  • Lightweight concrete

    Reduced-density aggregates

    Upper floors, infill

    Enquire

  • Pervious concrete

    Open-graded, interconnected voids

    Parking, pathways

    Enquire

  • Self-densifying concrete (SDC)

    Self-consolidating mix with VMA and superplasticiser

    Precast and selected structural applications

    Enquire

  • Foam concrete

    Cellular concrete; density to project specification

    Roof and floor insulation, void filling

    Enquire

  • Screed / concrete bucket

    Free-flow floor base or small-batch mix

    Floor finishes, repairs, steps and sunken slabs

    Enquire
Enquire about ready-mix concreteTechnical datasheets issued on request
02

Aggregates

Graded stone aggregates produced through the group's crushing and screening capacity, stockpiled by grade and dispatched in bulk.

  • 10 mm aggregate

    Graded, screened

    Concrete, plaster

    Enquire

  • 20 mm aggregate

    Graded, screened

    Structural concrete

    Enquire

  • 40 mm coarse aggregate

    Graded, screened

    Mass concrete, base layers

    Enquire

  • GSB / base course

    Blended to grading requirement

    Roads, platforms

    Enquire

  • Crusher dust

    Fine crushed stone

    Block-work, filling

    Enquire
Enquire about aggregatesTechnical datasheets issued on request
03

Sand

Manufactured sand produced from crushed rock, graded for concrete and plaster applications as an alternative to river sand.

  • Manufactured sand (M-sand)

    Graded, washed on request

    Concrete, screed

    Enquire

  • Plaster sand (P-sand)

    Finer grading for finishes

    Plaster, masonry

    Enquire
Enquire about sandTechnical datasheets issued on request
04

GGBS

A planned GGBS grinding plant is under development. Register an enquiry for proposed bulk or bagged supply; commissioning and availability are not yet confirmed.

  • GGBS — planned bulk supply

    Proposed silo or bulk tanker supply

    Batching plants, RMC

    Enquire

  • GGBS — planned bagged supply

    Proposed bagged supply

    Site mixing, smaller pours

    Enquire
Enquire about ggbsTechnical datasheets issued on request
05

Specialty Materials

Supporting materials and consumables supplied through BrikBox for project teams that buy across categories.

  • Cement

    OPC / PPC — brand and grade as ordered

    General construction

    Enquire

  • Steel and TMT

    Grade and diameter as ordered

    Reinforcement

    Enquire

  • Blocks and bricks

    AAC, solid and hollow blocks

    Masonry

    Enquire

  • Waterproofing and finishes

    System selection with technical support

    Basements, terraces, wet areas

    Enquire
Enquire about specialty materialsTechnical datasheets issued on request

Quality & testing

Three checks before any dispatch.

Material is inspected on arrival, monitored through batching and verified again before it leaves the plant. Cube samples are cast for the project's testing programme, and batch records are issued with the pour.

In-house laboratory
Batch-level traceability

Test certificates are project-specific and shared with the client. Published test results are pending verification.

01

Pre-pour inspection

Materials, formwork and the approved mix design are checked before placement begins.

02

During-pour checks

Slump and concrete temperature are checked during placement against the project requirements.

03

Post-pour review

Curing and surface finish are reviewed after placement, with project testing recorded as specified.

Technical laboratory

The group brief identifies compressive-strength, slump, air-content and durability testing, alongside research and development on new mixes. Equipment and test certificates are confirmed for each project before publication.

Need a specification or datasheet?

Send the project requirement — grades, volumes and pour conditions — and the technical team will respond with the applicable mix and test plan.

Request specifications